Gantry Cranes
Hoists & Components (10)
Demag DCL Compact Line – Compact, easy to assemble and service friendly, for heavy-duty applications…
Developed to meet practical needs, the new high-profile Demag DCL Compact Line features a number of innovations. With its new design, it not only looks good, it literally features more. Demag DCL Compact Line is specified for currents up to 200 A at 60% CDF. The system is fitted with up to 7 conductors, as required, both for supplying mobile consumers with power as well as for transferring control signals in your facility.
Demag KBK Trailing Power Supply Line System - For trailing cable power supply lines, light-weight cranes and monorails…
Select KBK 25 for reliable, robust and economical systems in material handling installations, mechanical engineering applications, trade and industry. Round or flat cross-section trailing cables can be used to supply power to electrical equipment on monorails and cranes. You can also use the profile sections to build small handling systems.
Duct-O-Wire Festoon Cable & Track Systems
-
14 Gauge C-Track and 12 Gauge C-Track systems are available in galvanized or stainless steel for flat or round cable and air hoses.
-
Factory pre-formed curves in 14 gauge systems are available in 4', 5', 6', and 7' radii.
-
Aluminum track is available for pipe type trolleys for both straight and curved systems.
-
Wire supported systems available for both flat and round cables.
-
New pendant control trolleys with Quick Plug disconnects available.
-
Special Applications & Services for Festoon Systems:
-
Stainless steel and brass bearings for special applications.
-
Precision bearings available in both 14 and 12 gauge sizes for long life wear and high speeds.
-
Both steel and plastic saddles available for flat and round cables.
-
Pre-assembled systems with cables on trolleys and packed for rapid installation.
-
Standard cables available in sizes ranging from #2AWG to #16AWG.
-
Cable fittings in both cast metal with grommets and non-metallic shrink type.
-
Tiered saddles for special cable loads or configurations.
Duct-O-Wire Conductor Systems
-
Bottom contact Figure 8 conductors from 90 to 350 amp.
-
Side contact Figure 8 conductors from 90 to 350 amp.
-
Heavy duty conductors in 500, 1000, and 1500 amp ratings with stainless steel running surface for longer wear and higher speed operation.
Special Applications and Services for Conductors:
-
Cover with ultra violet additive for outdoor sun locations.
-
High temperature cover (280F) for all Figure 8 and HD-500 conductors.
-
Stainless steel conductors in Figure 8 for corrosive atmospheres.
-
Epoxy coated, stainless steel, and insulated hangers for wet and corrosive atmospheres.
-
Factory built expansion sections and anchors for expansion control.
-
Factory bent curved conductor sections for Figure 8 systems.
-
A variety of Figure 8 covers for matching competitive systems.
-
Heated conductor systems for ice prevention on outdoor systems or freezer storage.
-
Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions.
Helm – Precision Crane is able to supply replacement parts for all of your Helm cable systems. Please contact us for further information on helm products or to place an order.
Saf-T-Bar Insulated Electrification Systems provide you with the technology to move material handling equipment, data and machinery safely and effectively. With six different series to choose from we’re confident we’ll be able find a system to suit your application:
Vahle Conductor Systems
Vahle Cable Management Systems
Demag Pendant Stations:
-
DST control pendants are used for controlling materials handling installations with several drive functions in your applications.
-
DSE multi-button control pendants are used for the manual control of machinery by means of contactors or frequency inverters and, more particularly, for controlling hoists and overhead traveling handling equipment from the floor. Various control switch combinations can be implemented using single or double-pressure or infinitely variable switching element types. All drives are controlled indirectly via contactors or frequency inverters in the auxiliary circuit.
-
Manually actuated DSK control pendants are used for contactor controls for machinery, however, preferably for the control of hoists and conveying systems from the ground in your applications.
Duct-O-Wire Pendant Stations - Duct-O-Wire has the most complete line of pendant stations in the industry. They offer a variety of pendants ranging from small and ergonomic two button enclosures to multi-function and severe environment application solutions. http://www.ductowire.com/pendants.php
-
L Series
-
PPS Series
-
J Series
-
RPB Series
-
RPS Series
-
PSW Series
-
K Series
-
Square D Series
Radio Remote Controls - Wherever you use radio control systems to control cranes, hoists, machinery and installations, you benefit from much greater flexibility than with wire-connected controls. Worker safety is greatly increased, as the operator can remain at a safe distance away from the moving load and functions can be easily customized to suit your individual requirements.
If you’re interested in having a radio control installed on your equipment, Precision Crane can help!
If you require end trucks for your equipment, we can supply them. Precision Crane is proud to be an authorized dealer of the following end truck manufacturer’s:
CM | Demag | Yale Hoists
Precision Crane is pleased to be able to provide various drive systems from Demag Cranes, as well as SEW-Eurodrive.
Demag Cranes & Components – The modular Demag gear motor system includes in-line gear motors, right angle gear motors and offset gear motors. All can be powered with the Demag "Indrive" variable speed gear motor, cylindrical rotor motors or conical rotor brake motors; gearboxes can be combined with micro-speed drives to produce the high ratios required by extremely accurate positioning applications. Output shafts are available in either inch or metric dimensions to accommodate a wide range of applications. A wide variety of single or multi-speed motor outputs are also available. Motor speed/torque curve options are available to match specific application requirements. In combination with the many braking, mounting and performance options, there are endless possible combinations of standard components to produce the precise solution for any application needed.
SEW-Eurodrive – As early as 1931 SEW launched the production and marketing of geared motors. The basic principle of the electrical drive with individualized speed and adapted torque has remained unchanged to this day. In all major industrialized countries of the Western World SEW-Eurodrive Group provides custom-made drive solutions for all applications drawing on a highly versatile modular system made up of gear units, variable speed gear units and motor components as well as electronic speed controllers.
Precision Crane is an authorized dealer for both Columbia & Demag Winches. Winches are the perfect solution for many typical pulling and lifting applications. A wide variety of options and modifications are available in an extensive range of capacities, drum sizes and gear ratios. We’re confident we can supply the right type of equipment for your lifting or pulling requirements. Please contact our equipment sales department for further Winch information or visit the website below.
Precision Crane is pleased to be able to supply our customers with a diverse selection of push, hand geared and motor driven trolleys for all hoists makes. Hook style and lug mounted trolleys are available to fit a wide range of beam flanges. Trolleys can be purchased in various capacities to suit your hoist requirements. For further information please select one of the links below or contact our sales department.
Chester Hoist | CM | Coffing Hoists | Demag | Jet Equipment | Kito | Yale Hoists
Beam clamps are an ideal overhead anchor point used for lifting and moving many products including hoists. These adjustable clamps can also be used as a positioning unit for holding items and can be mounted permanently or temporarily. They fit securely on a wide range of flange and beam widths and are available in 1 to 10 Ton capacities. Precision Crane is an authorized distributor for beam clamps from the following manufacturers.
CM | Jet Equipment | Kito
The Ratchet Lever is an economical hoisting choice. Ratchet levers are typically used in pulling applications. Their lightweight design makes them easy to move and useful in many situations. Choose from a variety of housing materials, brake options, load limiter options, capacities and lifts. We are pleased to be able to source Ratchet Lever Hoists from the following manufacturers.
Coffing Hoists | Jet Equipment | Kito | CM
A more economical lifting choice is available in diverse selection of Hand Chain Hoists. These lightweight, portable units are typically used in lifting applications and can be used in the field as they don’t require electricity to run. For further information on Hand Chain Hoists please contact our sales department or click on one of the following links.
CM | Coffing Hoists | Kito | Yale Hoists
Chain Hoists are known for the added benefits of their portability, compact size and are typically available at a lower cost than wire rope hoists. Precision Crane is pleased to be able to supply Electric Chain Hoists in varying models and capacities from the following manufacturers. Please click on one of the following links for further product information or contact us with any questions you might have.
Chester Hoist | CM | Coffing Hoists | Demag Cranes & Components | J.D. Neuhaus | Jet Equipment | Kito
Precision Crane is able to provide hoists in varying designs, capacities and lifts, suitable for virtually any application. Longer lifts and a higher lifting capacity with less dead-weight are both advantages of using a Wire Rope Hoist. We are pleased to be an authorized distributor of Wire Rope Hoists for the following manufacturers. Please follow the links below for additional product information or contact our office with any questions you might have.
Demag Cranes & Components | Columbia Winch & Hoist | Yale Hoists | Chester Hoist | Shaw Box
Need Help? Our Support team is here
Our in-house support team is also always available to provide you with the technical expertise you require to keep your equipment up and running. Problem, question or concern…we’re here to help!